Introduction

About Gesture Controlled Robotics Workshop

A Gesture Controlled robotics is a kind of robot which can be controlled by your hand gestures not by old buttons. You just need to wear a small transmitting device in your hand which included an acceleration meter. This will transmit an appropriate command to the robot so that it can do whatever we want. The transmitting device included a comparator IC for analog to digital conversion and an encoder IC(HT12E) which is use to encode the four bit data and then it will transmit by an RF Transmitter module.

Workshop Outcomes

  • Design, Develop and Test your own Gesture Based Robot
  • Exposure to Human Machine Interaction technologies
  • Understanding the working of an accelerometer
  • Understanding the structure and programming of microcontrollers
  • Practical experience for participant with DC motors, microcontrollers, sensors and accelerometers

Project To be Covered

  • Black Line Follower
  • White Line Follower
  • Edge Avoider Robot Wall Follower
  • Gesture Controlled Robot Using (ADXL-335)

Free Kit Component for Gesture Control Robotics

  • 1x (ATmega8)
  • 1x Triple Axis Accelerometer- ADXL335
  • 1x (USB Connector cable)
  • 1x (High Quality Plastic Chassis Board)
  • 1x (Screw driver)
  • 1x (Ball Caster wheel)
  • 2x (IR Based Digital Sensors)
  • 4x (Support Studs)
  • 1 Pair wheel 76mm Diameter
  • 1 Pair D.C Plastic gear motors
  • 1x CD

Workshop Duration: 2-Days (7-8 hours each day)

Workshop Certification

  • Certificate of Participation from RoboFeast’18  in Association With EDC IIT-Roorkee.
  • Certificate of merit from RoboFeast’18  in Association With EDC IIT-Roorkee.
  • Certificate of Coordination from RoboFeast’18  in Association With EDC IIT-Roorkee.
  • College will get Center of Excellence form RoboFeast’18  in Association With EDC IIT-Roorkee.

Workshop Fee:

Rs.1200/- Per Participant Only (The fee includes training, certification, and Event registration and a Free Gesture Robotics kit to each team of 5 members )

In case of any queries | please feel free to contact
Finland Labs
Phone : +91 -8505838080
(M), (011) 65544708(O)
Email : info@finlandlabs.com

Click Here to Download Complete Proposal

Course Structure

2-Days Gesture Controlled Robotics Course Content

Course Highlights

  • Design, Develop and Test your own Gesture Based Robot
  • Exposure to Human Machine Interaction technologies
  • Understanding the working of an accelerometer
  • Understanding the structure and programming of microcontrollers
  • Practical experience for participant with DC motors, microcontrollers, sensors and accelerometers

Zonal Competition

After the hand on theory and practical experience from the workshop, Zonal Round Competition will be conducted for the participants.

Certificate Distribution

Certificate of Merit will be provided to all Zonal Round Winners and Certificate of Participation will be provided to all the Zonal Round Participants.

Click Here to Download Complete Proposal

Championship Rounds

1st Stage (To be held at Zonal Centers)

  • Competitions will be held at different Zonal centers through workshop on Guesture Control Robotics.
  • All the participants who want to participate in ROBOFEAST-2018 Championship are required to attend the workshop at any zonal center.

2nd Stage (Prelims rounds to be held at zonal center):

  • Just after the workshop a Prelims Rounds of ROBOFEAST-2018 will held at zonal center.
  • Winners will be awarded with Certificate of Merit and will be eligible to participate in Final Rounds which will be held on March 2018 at IIT-Roorkee.

3rd Stage (FINAL Round to be held at IIT-Roorkee):

  • Winners of zonal centers will be called to participate in the biggest final round of ROBOFEAST-2018 championship will held on March 2018 at IIT-Roorkee
  • Top 3 Teams will be awarded as winners of The ROBOFEAST-2018 championship & will be awarded & honored by EDC,IIT-Roorkee.

Grand Final Competition

Grand finale of all zonal center winners will be in March 2018 at IIT-Roorkee

Zonal Level Competition Prelims

Rounds will be held just after the completion of workshop at zonal center

Zonal Level Workshop

2-Days workshop on Gesture Control Robotics will be organized by RoboFeast’18 at zonal center

Kit Components

Gesture Controlled Robotics Kit Components

  • 1x (ATmega8)
  • 1x Triple Axis Accelerometer- ADXL335
  • 1x (USB Connector cable)
  • 1x (High Quality Plastic Chassis Board)
  • 1x (Screw driver)
  • 1x (Ball Caster wheel)
  • 2x (IR Based Digital Sensors)
  • 4x (Support Studs)
  • 1 Pair wheel 76mm Diameter
  • 1 Pair D.C Plastic gear motors
  • 1x CD
  • Codes
  • Datasheets
  • Drivers
  • PPTs
  • Software
  • Tutorials
  • User Manual
  • Other required Tools and accessories etc.

** Free Gesture Robotics Kit to each team Group of 5 members .

Click Here to Download Complete Proposal

Workshop Benefits

Benefits to the participants of RoboFeast-2018

  • Learn & Interact with renowned Industry Experts.
  • Hands on Gesture Controlled robotics Experience.
  • Free Gesture Controlled robotics kit to each team of 5 members.
  • Top 3 member will be awarded with merit certificate & are required to participate in Final Rounds on march 2018 at IIT-Roorkee
  • Certificate of Participation to all Participants from RoBoFeast-2018,in Association with EDC IIT-Roorkee

Benefits of association with us

  • Name and Logo including website link will be published on our official website mentioning that “You are our Official Zonal Partner”.
  • Authorized Team will visit your College to organize the entire event.
  • An email will be sent to more than 1 lack users of our web partners about your college publicity.
  • Posters and Flexes will be sent to you for effective regional publicity.
  • All India publicity through SMS will also be done.

Requirements for Zonal Center

  • Seminar hall/classroom having the enough capacity to conduct hands-on-session for all participants.
  • Good Quality public address system ideally two cordless mikes will be required.
  • Projector/ Screen along with black/white board for teaching and presentation purposes.
  • One small stereo jack cord connects to laptop for its sound system.
  • Hospitality (2 days) for a team of 2 members (Quad copter Technical experts).
  • 2-Days workshop can only be arranged for a minimum of 60 Student

 

Who Could Attend?

All Engineering students & hobbyist of Robotics can attend this workshop, as Robotics has become the backbone of all the industry needs.